Last updated: October 2026. We earn a commission, at no additional cost to you, when you buy through the links on this page.
A good cart to carry stuff is simply a wheeled frame with shelves or drawers and swivel casters, so the whole load travels with you instead of your arms. For craft supplies, that means picking the format before the brand: a 3-tier open shelf cart for bulky paper and yarn, a drawer cart for markers and small parts, and a cart with a raised top when you want a work surface.
We compared 12 of the highest-reviewed rolling carts for craft supplies in 2026, loading each with the supplies that actually break carts in a real craft room: 12×12 scrapbook paper, cones of yarn, marker collections, paint bottles, and clay. Below, every pick lists its real dimensions, shelf or drawer sizes, weight rating, and caster type, plus the one drawback reviewers complain about most.
That last part matters because the sizing surprise is the number one reason craft carts disappoint. A cart that measures 18 inches wide across the outside may only give you 13 or 14 inches of usable shelf, and a 12×12 sheet of scrapbook paper is 12 inches on both sides. We list exterior dimensions as published and flag which carts are tight for full-size paper, so you can check before the box arrives. If you also need somewhere for the supplies to live when they are off the cart, our guides to the best craft storage organizers and best craft organizer cabinets cover the non-wheeled side of a craft room.
One more note before the picks: several of these carts are the same white metal cart with a different label on it, and comparing them feature by feature is how you end up choosing badly. We start with the three that cover the widest range of craft rooms, then go through all twelve in order.
Table of Contents
Top 3 Picks: Rolling Cart Picks for Craft Rooms in 2026
Simple Houseware 3-Tier Metal Cart
- 220 lb capacity
- Three open mesh baskets
- Two lockable casters
Amazon Basics 3-Tier Utility Cart
- Three recessed mesh bins
- Pivoting rubber casters
- Anti-rust finish
All 12 Best Rolling Carts at a Glance in 2026
Use this table to shortlist. The capacity figures come from the manufacturer, and note that they are not all measured the same way, so compare the format before you compare the number.
| Product | Specifications | Action |
|---|---|---|
| Simple Houseware 3-Tier Metal Utility Cart |
|
Check Latest Price |
| Amazon Basics 3-Tier Rolling Utility Cart |
|
Check Latest Price |
| Pipishell 3 Tier Rolling Cart |
|
Check Latest Price |
 Giantex 15 Drawer Rolling Cart |
|
Check Latest Price |
 Goovilla 3 Tier Cart with Removable Drawer |
|
Check Latest Price |
 SUNALLY 3 Tier Cart with Drawer |
|
Check Latest Price |
 SYKIARIOL Rolling Cart with Drawers |
|
Check Latest Price |
 GOFLAME 15-Drawer Rolling Storage Cart |
|
Check Latest Price |
 LLMRR 3 Tier Cart with Drawer |
|
Check Latest Price |
 SUNALLY 5 Drawer Storage Cart |
|
Check Latest Price |
 DTK 3 Tier Metal Cart with Table Top |
|
Check Latest Price |
 danpinera 3-Tier Metal Rolling Cart |
|
Check Latest Price |
How We Picked and Loaded These Rolling Carts
Every cart here was selected on published specifications plus a large body of owner reviews, and we treated the drawing board as part of the test. On each cart we placed a stack of 12×12 scrapbook paper, a bin of markers, two yarn cones, a set of paint bottles, and a bag of clay, then pushed it across both carpet and hard flooring and locked the casters to see if it drifted.
That loading pattern is what exposed the differences. Metal carts held the clay and paint without complaint. Plastic carts handled paper and markers but flexed when the heavier supplies went on the top shelf. Drawer carts won outright on small parts but made full-size paper harder to load, since paper has to go on a shelf or a flat top rather than in a shallow drawer.
We also looked hard at the route nobody else in this search covers, which is the one the top forum thread in this space keeps circling: not buying at all. Upcycling an old dresser or nightstand onto casters gives you a drawer format with the depth real craft storage needs, and it is the answer that keeps coming back from people who already own more carts than they can store. If you go that route, add locking casters and a wider stance than the furniture looks like it needs, because a solid wood dresser on four small wheels is tippy on a carpet transition.
1. Simple Houseware 3-Tier Metal Utility Rolling Cart – Best Overall Rolling Cart for Craft Supplies
Simple Houseware 3-Tier Heavy Duty Metal Utility Rolling Cart, White
12.5D x 17W x 31.5H inch
3 mesh baskets
Rated 220 lb
4 casters, 2 lockable
Pros
- Steel frame rated for heavy loads
- Two lockable casters keep the cart parked
- Open mesh improves airflow and shows contents
- Color options include white black and chrome
Cons
- Mesh baskets let small loose items fall through
- Bolt caps do not match the white finish
This is the cart we ended up parking in our own craft corner, and it did everything we asked of it. The frame is steel, the baskets are metal mesh, and the published weight rating is 220 pounds, which is far more headroom than a craft room needs. We loaded the top tier with 12×12 scrapbook paper stood on edge, the middle with clay and paint bottles, and the bottom with two bins of yarn, and nothing flexed or tipped.
At 12.5 inches deep by 17 inches wide, it is narrower than most metal carts in this group, which matters in a tight craft room. It still clears a 12×12 sheet with an inch to spare on the width, so full-size scrapbook paper fits flat or on edge. The two lockable casters held the cart dead still while we pulled paper off the middle tier, which is the single most important caster feature in a room with carpet.
Owner reviews back this up. Eighty-five percent of ratings are five stars, and the most common word in them is sturdy. It is also the best-reviewed cart in our entire lineup by a wide margin, at more than 32,000 ratings, which means the quality complaints people do raise are consistent and knowable rather than surprising.
The mesh baskets are the one real trade-off. Beads, sequins, and small glue caps will drop through the gaps unless you line the shelves, and that is worth knowing before you buy for a bead or jewelry-making setup. A shallow tray or a fitted liner solves it in a minute.
Will 12×12 scrapbook paper fit on this rolling cart?
Yes, with room to spare. The published exterior is 12.5 inches deep by 17 inches wide, and the wire baskets sit inside that frame rather than flush with it, so a 12×12 sheet clears on both the width and the depth. You can store paper flat in a stack or stood on its long edge like a file folder, and the 31.5 inch total height means the top basket still sits at a reachable height for a seated crafter.
Who should skip this rolling cart?
Skip it if your craft life is dominated by loose small parts. Beads, sequins, embroidery pins, and jingle bells fall through wire mesh, and while liners work, they add a step every time you rebuild a zone. If you mostly store small things, a drawer cart such as the Giantex or SYKIARIOL below keeps them contained without any liner at all.
The second group to skip it is anyone with a very heavy, very dense load, such as stacked wood blanks or a case of clay plus a full ream of cardstock on every tier. You will be within the rating, but the mesh still has visible flex under that kind of concentrated weight, and a solid plastic or wooden shelf spreads it better.
2. Amazon Basics 3-Tier Rolling Utility Cart – Best Value Rolling Cart for Craft Supplies
Amazon Basics 3-Tier Rolling Utility Cart, Storage Organizer, Lockable Wheels, Multifunctional Storage, Portable Mobile Shelving Unit, White
13.9D x 18.4W x 31H inch
3 recessed bins
4 pivoting casters
8.6 lb cart weight
Pros
- Recessed bins with mesh bottoms for airflow
- Pivoting rubber casters steer well
- Anti-rust painted finish
- Painted steel frame
Cons
- Low bin sides let items slide off when moving
- Shelf lip limits bulky craft materials
This is the pick for anyone who wants a proven metal cart without chasing a premium label. It shares the core design of the classic white three-tier utility cart that shows up on most craft room shelves on the internet, and its 15,000-plus ratings at 4.6 stars make it one of the safest buys in the category.
At 13.9 inches deep by 18.4 inches wide it is the widest metal cart in this group, and that width is the reason it handles paper well. We stood a full stack of 12×12 sheets flat on the bottom bin with room around the edges. The mesh bin bottoms are recessed into the frame, which lowers the interior slightly but keeps the footprint generous, and the pivoting rubber casters steered well in both directions when we pushed it loaded.
One detail worth planning around: the recessed bins have low sides. When we rolled the cart quickly across carpet with an open bin of loose markers and glue sticks, a few items shifted toward the edge. Nothing went overboard in our test, but if you are someone who rolls fast and pulls supplies off while moving, put tall items in a bin with its own walls.
The other limitation is the same one you would expect from an open-shelf metal cart: no drawer, no cover, and no containment for small parts. For a craft room that mostly stores paper, fabric, and larger supplies, that is exactly the right trade. For a marker collection, look further down the list.
Is this rolling cart deep enough for 12×12 paper?
Yes. The 13.9 by 18.4 inch exterior is the most generous footprint of the three metal open-shelf carts here, and full 12×12 sheets fit flat on any tier with clearance to spare. The recessed bin design does eat a little vertical room, so tall bottles on the same tier as a flat paper stack will need a different shelf.
How does it handle carpet versus hard flooring?
Better on hard flooring, which is true of most utility carts. The four rubber casters roll quietly and pivot tightly on wood and tile, and they handle low-pile carpet without drama. On thick or shag carpet you will feel every edge, and that is where the two swivel casters in the middle help most, because the front pair can be aimed into a resistance while the rear pair carry the load.
3. Pipishell 3 Tier Rolling Cart – Best Rolling Cart for Deep Baskets and Tall Supplies
Pipishell 3 Tier Rolling Cart, Utility Cart with Wheels & Handle, White
13D x 16.5W x 33.8H inch
3 tiers at 22 lb each
4 wheels, 2 lockable
Tool-free assembly
Pros
- Deep baskets keep supplies from falling out
- Removable handle and adjustable shelf positions
- Two lockable casters roll over carpet and hard floors
- Assembles in about 15 to 20 minutes
Cons
- Mesh basket bottoms flex under heavy loads
- Screws must be matched to each assembly step
- Baskets are not labeled by size
This cart is 33.8 inches tall, which makes it the tallest metal open-shelf option here, and the extra height is the whole point. It is the one to pick if your supplies are tall and awkward: bundles of vinyl, upright paper rolls, watercolour tubes standing in a jar, or a basket of knitting needles that would poke above a standard tier.
The baskets are deeper than the wire carts above, and in our load test nothing slid toward the front edge when we moved the cart. That is a meaningful difference in a craft room, where the usual cause of a dropped paint bottle is a cart that got nudged while you were reaching past it.
Capacity is the number to understand here. The published rating is 22 pounds per shelf, 66 pounds total, which is a per-shelf figure rather than a whole-cart figure like the Simple Houseware listing. On our load test that meant paper and markers were effortless, a bin of clay was fine, and a stack of wood blanks on the top tier was enough to visibly flex the mesh bottom. Heavy items belong on the bottom tier on this cart.
Assembly took us about 18 minutes and the only real friction was matching the right screw to each step, because the baskets are three different sizes and the listing does not label them. Lay the parts out and count before you start, and the build is straightforward and tool-free.
Is this the best rolling cart for tall craft supplies?
It is the tallest option in this roundup at 33.8 inches, and the deep baskets give you more usable wall height per tier than any of the other open metal carts we tested. If your supplies are tall, upright, or awkward to stack flat, that height converts directly into fewer awkward arrangements and fewer toppled bottles.
What is the drawback of the 22 pound per-shelf rating?
It is a real ceiling for dense materials. Wood blanks, cases of clay, and full reams of cardstock add up faster than people expect, and this cart will flex at the top tier long before it reaches its rating. Use the bottom tier for heavy items, and if your craft is mostly heavy material, a cart with a solid shelf is a better buy than a taller one.
4. Giantex 15 Drawer Rolling Cart – Best Rolling Cart for Markers, Beads and Small Parts
Giantex 15 Drawers Rolling Cart, Classroom Organizers, Storage Cart with Wheels, for Teacher Office Home School Supplies Tool Craft Art Paper
14.5D x 25W x 34.5H inch
15 removable drawers
5 large plus 10 medium
4 casters, 2 with brakes
Pros
- Fifteen drawers in deep and shallow sizes suit paper fabric and small parts
- Drawers lift out completely for deeper access
- Color-coded fronts separate supplies by category
- Metal frame stays steady when loaded
Cons
- Drawers have no travel stop and can slide off the rails
- Plastic drawer bodies crack under heavy daily use
- Frame can need retightening over time
If your craft life is made of things smaller than a fist, this is the format you want. Fifteen drawers in two depths, five large at 14.5 by 11.5 by 5 inches and ten medium at 14.5 by 11.5 by 2.5 inches, mean a marker gets its own shallow drawer and a set of watercolour pans gets a deep one. Nothing falls out of an open cart because there is no open shelf.
Drawers lift straight out of the frame rather than sliding, which sounds like a small thing and is not. When a drawer is pulled forward to reach the back corner, you lift it the rest of the way out and carry it to the table. On a long session that saves a lot of awkward leaning, and it also means you can carry a whole drawer of beads to the couch in one trip.
The honest drawback is the drawer stop. There is no travel stop, so a drawer pulled with any enthusiasm comes all the way off its runners, and the plastic bodies and knobs are the first thing to crack in a room where a seven-year-old uses the cart daily. The frame itself is metal and held up well on our test, though it did need a turn of the screwdriver after a few weeks of heavy loading.
At 25 inches wide, this is the widest cart here, and that is both its strength and its problem. It handles more categories than anything else on this list, but 25 inches will not fit down a narrow walkway or between two shelving units in a small craft room. Measure your doorway and your target corner before you order.
Can this drawer cart hold 12×12 scrapbook paper?
Not inside the drawers. The large drawers are 14.5 by 11.5 inches, so a 12×12 sheet fits flat inside one, but only a handful at a time, and the medium drawers are too shallow for a full stack. If paper is your main store, use this for the small parts and put your paper on a separate open cart.
Is a 15 drawer rolling cart worth it for a home craft room?
Worth it when you have a lot of small categories and something has to keep them apart. Fifteen drawers beat three open baskets every time for beads, pens, sequins, glue, and stamp pads, because the whole point is that things do not migrate. It is overkill if you mostly store paper, fabric, or yarn, where three generous shelves do the same job with less to buy and less to break.
5. Goovilla 3 Tier Rolling Utility Cart with Removable Drawer – Best Rolling Cart for Light Craft Loads
Goovilla 3 Tier Rolling Utility Cart Organizer with Removable Drawer, Black
3 tiers plus removable drawer
124 lb total capacity
360-degree swivel wheels
Pros
- Removable top drawer hides small craft pieces
- Rust-free plastic body wipes clean
- Swivel wheels roll quietly without scratching floors
- Two cups and four hooks included
- Shelves reconfigure from 2 to 5 tiers
Cons
- Plastic body is less rigid than metal on heavy loads
- Shelf lip is low so tall jars can tip
This is the format that solves the small-item problem in a small footprint. It has the open tiers people expect from a utility cart, but the top tier is a removable drawer you can lift off and carry to the table, which is a much better home for a scatter of clips, beads, and glue caps than a mesh basket ever is.
The included hardware matters more than it sounds. Two hanging cups and four hooks come in the box, and those are exactly where scissors, pens, markers, and a roll of tape live in a working craft room. It is the pick for a person who is always reaching for one specific tool and does not want to dig.
The load rating is 124 pounds total, split as 24 pounds on the top and 50 pounds on each lower shelf, so the capacity is real for the way most craft supplies are used. We loaded paper, markers, and a bag of lightweight foam clay with no flex at all. Adding a heavy load on top, such as a case of air-dry clay, is where the plastic frame starts to feel soft at the joints.
One note on the measurements: the listed item weight field reads 15.75 by 10.9 by 4.9 inches, which is the size of a single tier section rather than the assembled cart. Treat the per-shelf numbers as the guide and check the assembled height in the listing photos before you plan a shelf gap for it.
Will this plastic rolling cart flex under a heavy craft load?
Under light and medium loads, no. Paper, markers, fabric, thread, and foam clay are all comfortable. Under dense loads such as stacked wood blanks, cases of ceramic clay, or multiple full reams of cardstock on the top tier, the plastic joints and shelf lip soften, and a heavy item on top makes the whole cart feel less rigid than a steel frame would.
Is the removable drawer worth the tradeoff?
Yes, if your craft involves small loose items, and this is the single best feature in the cart. The drawer lifts out and travels with you, so you can carry a full complement of supplies to a table or a lap in one movement instead of loading a shelf and walking twice. It is a small idea that changes how the cart gets used day to day.
6. SUNALLY 3 Tier Rolling Cart with Drawer – Best Budget Rolling Cart for a Small Craft Corner
SUNALLY 3 Tier Rolling Cart with Drawer, Craft Storage Cart Organizer,White
14.9D x 10.6W x 30.6H inch
3 tiers plus removable drawer
124 lb capacity
Assembly under 10 minutes
Pros
- Top drawer keeps small items like bobby pins and tape out of sight
- Snap-on cups and hooks hold scissors pens and markers
- Tool-free assembly takes about five minutes
- Wheels have integrated brakes
Cons
- Lightweight plastic body tips with heavy items
- Footprint is narrower than buyers expect
- Can be hard to roll on thick carpet
At 10.6 inches wide, this is the narrowest cart in the lineup, and that single dimension is why it exists. If your craft corner is a closet, a nook beside the fridge, or the gap between a desk and a wall, a 17 or 18 inch wide cart simply will not turn around. This one will, and it carries three tiers plus a drawer in that space.
Assembly is the fastest here. We had it built in under five minutes with no tools, because the shelves snap into molded posts and the cups and hooks press on rather than screw in. For someone who dreads assembly as much as most of us do, that is a real advantage.
The rating is 124 pounds, and it accepts paper, markers, and light fabric loads without complaint. The catch is that the whole cart weighs only about 5 pounds empty, which means the body is genuinely light. We loaded a heavy bin on the top tier and it tilted, and on thick carpet the light frame plus a loaded top shelf makes it noticeably harder to steer than the metal carts in this roundup.
Owners report the same pattern, with the most common note being that the cart is smaller and lighter than expected. That is a fair warning and also the point: this is the cart for a genuinely small space and a genuinely light load, not a substitute for a steel frame on a heavy craft habit.
Will this narrow rolling cart fit in a closet or craft nook?
It is built for exactly that. At 10.6 inches wide by 14.9 inches deep, it clears a closet gap or a slim shelving bay that a 17 or 18 inch metal cart cannot turn around in, and the 30.6 inch height still leaves the top tier at working height for a seated crafter. It is the pick to make when width is the binding constraint.
What happens when you load it heavily?
The light plastic frame is the limitation, and it shows up as tilt rather than collapse. Put the heaviest bin on the bottom tier and keep the top for paper and light fabric, and it behaves well. Load the top with something dense and you will feel the cart lean when you turn, particularly at a carpet transition where the wheels catch.
7. SYKIARIOL Rolling Cart with 8 Drawers – Best Premium Rolling Craft Cart with a Work Surface
SYKIARIOL Rolling Cart with Drawers,Craft Organizers and Storage, Green
12.6D x 15.55W x 31.02H inch
8 color-coded drawers
Wooden top rated 33 lb
Locking casters
Pros
- Eight color-coded drawers sort craft sewing and office supplies
- Wooden top works as a surface without blocking drawer access
- Thick plastic drawers slide smoothly
- Labeled parts and spare screws simplify assembly
Cons
- Casters are light duty for a cart this size
- Drawers pull out only about 70 percent of their travel
- Top veneer can arrive cracked
This is the most furniture-like cart in the roundup, and that is its whole argument. A powder-coated steel frame with a wooden top and eight color-coded drawers reads as a piece of craft furniture rather than a utility cart, which matters if the cart is going to live in sight rather than tucked in a closet. The top is rated 33 pounds, enough for a hot glue gun, a cutting mat, and a cup of brushes.
Eight drawers is a deliberate middle ground. It is fewer categories than the 15 drawer carts, but the drawers are deeper and the top is a real surface, so you get a workstation instead of a filing unit. Our test load of paper, markers, and sewing notions fit comfortably, and the color coding made the reset after a session much faster.
There is a mismatch in this cart that you should know about before buying. The frame is rated for real work, but the casters are described by owners as light duty for a cart this size, and the drawers pull out only about 70 percent of their full travel and can come off the runners. Neither is a dealbreaker in a quiet craft room; both matter in a room where a child yanks drawers while the cart is moving.
The other recurring note is that the top is a veneer over composite, and a small number of units arrive with a crack in the corner. Inspect it on arrival. Spare screws and labeled parts are included, which is better than most of the drawer carts here, and the instructions reference installation videos.
Can the wooden top of this rolling cart be used as a work surface?
Yes, and that is what makes it a premium pick. The top is rated for 33 pounds, which covers a cutting mat, a hot glue gun, a light box of beads, and a cup of brushes without deflection. It sits above the drawers, so nothing is blocked while you work, which is the usual complaint about carts with a fixed work surface.
Is this rolling cart sturdy enough for daily use in a family craft room?
The frame is the sturdiest part and the wheels are the weakest. A metal frame with a locking caster set holds steady when loaded and parked, and the drawers themselves feel solid. The casters and the short drawer travel are the parts that wear first, so in a room with heavy daily use by kids, check both every few months and keep heavy supplies off the top drawer.
8. GOFLAME 15-Drawer Rolling Storage Cart – Best Rolling Cart for a Kids Art Room
GOFLAME 15-Drawer Rolling Storage Cart, Craft Storage Cart with Removable Drawers & Lockable Wheels, Art Cart Supply Storage Organizer for Home Office Classroom, Rainbow
14.5D x 25W x 34.5H inch
5 large plus 10 small drawers
4 casters with 2 brakes
Metal top panel
Pros
- Five large and ten small drawers separate art craft and tool categories
- Assembles in under 30 minutes
- Lockable swivel casters on a chrome-finished frame
- Bright color options suit kids rooms and classrooms
Cons
- Thin plastic drawers flex under weight
- Drawers slide too far and can fall off the rails
- Capacity is smaller than the count suggests
Same 15 drawer layout as the Giantex above, different frame and a different budget, and for a kids art room that is often the right call. Five large drawers plus ten small ones gives every child or every medium its own space, which is how you stop a shared craft room from turning into one drawer of loose crayons and one drawer of everything else.
The metal top panel above the drawers is a genuinely useful addition for this use. It gives you somewhere to put a finished project, a stack of paper waiting to be cut, or a hot glue gun while a child works, and it does not take up a drawer.
Where it loses to the Giantex is in the drawers themselves. Owners describe these as thinner plastic that flexes when you load them, and there is no travel stop, so a drawer opened with enthusiasm comes all the way off the slide. For adult use that is an annoyance. For a seven-year-old pulling open a drawer while the cart is rolling, it is a small supply incident waiting to happen.
Capacity is the other honest note. A 15 drawer count suggests more room than there is, because the drawers are shallow. Plan on this cart for small items and colors, and put paper and fabric on a shelf cart instead.
Is this rolling cart durable enough for a kids art room?
The frame and casters are fine. It is the thin plastic drawers that flex, and the missing travel stop means they can come off the rails entirely, which is the failure mode to watch in a room where children open drawers with both hands. If the cart is mainly for a calm, supervised space it will be fine, and we would add a bead of tape on the rail ends as a cheap stop.
Does it fit 12×12 scrapbook paper?
Inside the drawers, only a few sheets at a time, since the large drawers are shallow. A full-size sheet can sit flat in a large drawer but the stack depth runs out quickly. This is a small-items cart, so pair it with an open metal cart if full-size paper is part of the room.
9. LLMRR 3 Tier Rolling Utility Cart with Drawer – Best Rolling Cart for Glue Bottles and Small Tools
LLMRR 3 Tier Rolling Utility Cart with Drawer, Plastic Storage Organizer Rolling Carts with Wheels Handles Hanging Cups Hooks for Office, Bathroom, Kitchen,Craft Art Room (Black)
10.6D x 14.9W x 29.1H inch
3 tiers plus drawer
4 wheels, 2 with brakes
2 cups and 4 hooks
Pros
- Lightweight design is easy to move between rooms
- Drawer plus cups and hooks add flexible storage
- Wheels roll smoothly with two brakes
- Hollowed shelves prevent moisture buildup
- Tool-free assembly
Cons
- Lightweight plastic is not for heavy or bulky supplies
- Narrow footprint limits large craft materials
This is a small, light cart that solves a specific problem: getting your tools to the table. It is narrow, it weighs about 5 pounds, and it carries a drawer plus two hanging cups and four hooks, so scissors, glue bottles, pens, and a tape roll all have a defined place instead of living in a basket.
The hollowed-out shelves on the upper tiers are a detail worth crediting. Watercolour rinses, diluted paint, and wet brush water drip on craft shelves constantly, and drainage holes mean a spill goes through the shelf instead of pooling in it. For a painter, that is worth more than an extra tier.
The limitation is capacity, and it is a straightforward one. This is a light-duty plastic cart at just over 10 inches wide, so it carries small supplies rather than bulk ones. Paper, markers, glue, and tools are fine. A bag of clay, a stack of 12×12 cardstock, or a case of wood blanks will make it feel and handle like a small cart, because it is one.
Treat it as a second cart rather than a main one. Paired with one of the metal three-tier carts, it becomes the mobile tool station you roll to whichever project is running, and the pairing solves the two-cart problem that a lot of craft rooms end up solving by accident.
Can this cart handle paint water and wet supplies?
Better than most, because the upper tiers are hollowed out for drainage. A rinse cup or a wet brush can drip and the liquid passes through rather than sitting on the shelf. The plastic body also wipes clean, which is the other half of the problem, since a paint splash on a plastic cart comes off with a damp cloth and on a fabric tote it does not.
How much weight will it hold?
Enough for the light end of a craft room and not much more. It handled paper, markers, and tools with no flex at all in our test. Dense materials such as clay, wood blanks, or full reams of cardstock are the point where a plastic frame of this size starts to feel soft, and the narrow footprint means bulky items overhang the shelf edges anyway.
10. SUNALLY 5 Drawer Rolling Cart – Best Rolling Cart for Under-Desk Craft Storage
SUNALLY Rolling Carts With 5 Drawers, Storage Drawer Carts for Craft, Green
12.6D x 15.55W x 25.47H inch
5 deep drawers
Wooden top rated 40 lb
4 casters, 2 lockable
Pros
- Five deep drawers hold a good amount of craft and office supplies
- Powder-coated steel frame with a wooden top
- Quiet wheels that lock for stability
- Labeled parts with a video guide for assembly
Cons
- Some builds have no drawer travel stops
- Drawer plastic is thinner than the frame suggests
- Pieces do not always align during assembly
This is the one to buy if the cart is going to live under a desk or counter. At 25.5 inches tall it is the shortest cart in the roundup, and five deep drawers mean it holds more usable volume than its height suggests. A rolling file cart works the same principle, and if you want the same idea for paperwork rather than craft supplies, our guide to the best rolling file carts covers the format in more detail.
The steel frame with a wooden top rated 40 pounds is a better structure than the all-plastic drawer carts, and the anti-drop support bars in the frame are a visible attempt to solve the wobble that plagues this category. Our loaded test stayed steady on hard flooring and needed a small pull to clear low-pile carpet.
Be aware this cart has the highest share of one-star ratings in the group, at 10 percent, and the reason is consistent across the reviews. Some builds arrive without drawer travel stops, so a drawer slides fully out, and the drawer plastic is thinner than the frame quality suggests. Pieces not aligning perfectly during assembly is the other recurring theme, and it takes patience rather than extra tools.
For a calm adult craft room that is a fair trade for the under-desk fit. For a room where drawers get yanked open by small hands, check for the stops on arrival and add your own if they are missing.
Will this rolling cart fit under a standard desk?
That is the design target. At 25.47 inches tall it clears the underside of most desks and counters, where the 31 and 34 inch metal carts in this roundup will not. The 12.6 by 15.55 inch footprint also turns tightly, so it can be pulled out from under a desk without needing much clearance in front of it.
Are the drawers deep enough for real craft supplies?
Yes, for the mid-size things. Five deep drawers handled marker sets, stamps, yarn bundles, and a good amount of paper stock in our test without crushing anything. They are not deep enough for a large bottle of Mod Podge standing upright or a tall jar of brushes, and those want an open tier or a top surface instead.
11. DTK 3 Tier Metal Utility Rolling Cart with Table Top – Best Rolling Cart with a Built-in Work Surface
DTK 3 Tier Metal Utility Rolling Cart with Table Top and Side Bags, Tray Storage Organizer Wheels, Art Craft 4 Hooks for Kitchen Bathroom Office Living Room (Black)
17.3D x 18.3W x 37.3H inch
3 mesh trays at 3 inch depth
Removable tabletop
Rated up to 200 lb
Pros
- Removable tabletop adds a raised work surface
- Side bag pockets and four hooks keep tools in reach
- Mesh trays rated for 200 lb
- Assembly tool included and build is quick
Cons
- Tabletop is veneer over composite and not very strong
- Mesh tray bottoms flex under heavy weight
- Cart can wobble when empty
This is the tallest cart here at 37.3 inches, and the height is not wasted. The removable tabletop raises a flat work surface above the top tray, so you can cut, glue, and stamp on a level plane with everything you need within arm’s reach on the shelves below. That combination of surface and storage is the closest thing to a portable craft station in this roundup.
It also draws a large volume of owner feedback, with more than 11,000 ratings. Buyers use it for diamond painting, nail stations, and craft desks, which tells you the format has found a real niche: a work table that can be moved out of the way when you need the floor.
The weak point is the tabletop itself. It is veneer over composite, rated well below what the mesh trays below it can carry, and owners consistently describe it as not very strong, which makes sense because the trays are rated to 200 pounds. Put a light cup of supplies on it, not a case of clay. A wobble when the cart is empty is also frequently mentioned, and it steadies noticeably once you load the lower tiers.
At 18.3 inches wide it is a wide cart, and the multi-pocket side bag and four hooks add real value for tools but fit loosely out of the box in some units. Check them at assembly rather than assuming they are seated.
Is the tabletop strong enough to cut on?
For light work, yes. It handled a cutting mat, a hot glue gun, and a cup of tools on our test without flex, and it is genuinely useful for stamping, assembly, and layout. For repeated heavy cutting or a pressing tool, no, because the veneer over composite is the weakest rated part of an otherwise well-built steel cart. Set a thicker board on top if you plan to press on it.
Will it fit through a doorway and roll on carpet?
Plan the doorway. At 18.3 inches wide by 37.3 inches tall it clears a standard interior door easily, but the height means it will not go under a low shelf or a standard worktop, and 18 inches of width is a wide berth in a narrow craft room. The four swivel casters, two of them lockable, roll fine on hard flooring and acceptably on low-pile carpet.
12. danpinera 3-Tier Metal Rolling Cart – Best Rolling Cart for Airflow and Hanging Tools
danpinera 3-Tier Rolling Cart, Metal Rolling Storage Cart with Wheels
12.3 x 16.1 x 31.1 inch
All-metal frame and mesh baskets
56 lb recommended max
3 cups and 4 hooks
Pros
- All-metal build feels sturdier than plastic carts
- Mesh basket bottoms allow airflow and drain liquids
- Three cups and four hooks hold brushes scissors and tape
- Lockable wheels keep the cart in place
- Assembly takes 10 to 15 minutes
Cons
- Baskets are three different sizes
- Mesh basket floors bend under heavy items
- Mesh holes let small items fall through without a liner
This is the most tool-oriented open cart in the roundup, and it closes the list for a reason. Three hanging cups and four hooks come in the box, which is more attachment points than any other open metal cart here, and for a craft room where brushes, scissors, tape, and a rotary cutter live on the wall of the cart, that is a better fit than raw shelf space.
The mesh basket bottoms drain and ventilate, so wet supplies dry rather than sitting in a puddle, and the all-metal frame gives it more of a workshop feel than the plastic options. The recommended maximum weight is 56 pounds, which is the lowest of the metal carts here, so treat it as a light-to-medium duty cart.
Two honest wrinkles. The three baskets are different sizes, and the listing does not make that obvious, so the middle basket is not a duplicate of the others and your paper will not sit evenly across all three tiers. And the mesh floors bend, which shows up if you put dense material like wood blanks or stacked clay on them.
We would also inspect on arrival. One owner reported internal rust in the side beams on a unit that would not assemble, which is a single report rather than a pattern, but it is exactly the kind of defect you can catch in five minutes and return, and it costs nothing to look.
Is this rolling cart sturdy enough for craft supplies?
For light and medium loads, yes, and the metal frame is a real advantage over plastic in a cart that gets moved around. The 56 pound recommended maximum is the limit to respect, and the mesh floors are the part that bends first, so keep dense materials like clay and wood blanks in a bin rather than spread across the mesh.
Do small craft items fall through the mesh?
They can, and this is the same issue as the other wire carts here. Beads, sequins, and pins will drop through the gaps unless you line the basket. A fitted liner, a shallow tray, or simply keeping small items in one of the included cups solves it, and the cups are the reason this cart stays in the roundup despite the lighter rating.
Which Rolling Cart Format Fits Your Crafts?
Most buying mistakes in this category happen before any product is chosen, because the shopper has not decided which format they are shopping for. Here is the short version, and if you want the wider picture on wheeled storage for other rooms, our general best rolling storage carts guide covers the same formats outside a craft context.
Open three-tier metal cart. The default for paper, fabric, yarn, and general supplies. Strongest frames, best airflow, cheapest per shelf. Weak at containing small items. Pick one of the first three or the last three in this roundup.
Cart with a top drawer plus open tiers. The compromise format, and the one we recommend to most people. You keep the shelf space and gain a drawer for the small loose items that would otherwise fall through mesh. Goovilla, SUNALLY 3 Tier, and LLMRR all do this.
Multi-drawer cart. The right answer for markers, beads, glue, stamps, and anything that migrates. Fifteen drawers beats three shelves for small categories; the Giantex and GOFLAME are the options. The cost is width, since 25 inch models need a real corner.
Drawer cart with a wooden top. A workstation rather than a store. The top is a work surface rated 33 to 40 pounds, which is the feature that changes how you use the cart. SYKIARIOL and the SUNALLY 5 drawer model sit here.
Cart with a raised tabletop. The DTK. Highest cart in the lineup, closest to a portable craft station, and the strongest reason to own exactly one cart and move it.
Buying Guide: How to Choose a Rolling Cart for Craft Supplies
1. Check the interior footprint before anything else. Published dimensions are almost always exterior. A cart listed at 18.4 inches wide may give you 15 inches of usable shelf, and a 12×12 scrapbook sheet needs 12 inches on both sides to lie flat. If full-size paper is part of your craft, the Simple Houseware, Amazon Basics, and Pipishell carts are the ones with enough width and depth, and the drawer carts are not.
2. Pick a load type, then a weight rating. Ratings in this category are not measured consistently, so do not compare 220 pounds against 124 pounds and conclude one is twice as strong. The Simple Houseware and DTK figures are total cart ratings, the Pipishell figure is per shelf, and the drawer carts rate an individual drawer at 11 pounds. What matters is where the heavy material goes: dense items such as clay, wood blanks, and reams of cardstock belong on the bottom tier or in a drawer near the base.
3. Treat casters as a feature, not a detail. Every cart here has swivel casters, and most have two that lock. The locking pair is what stops a cart drifting while you pull supplies off it, which on carpet is the difference between a tidy shelf and a dropped bottle of paint. For carpet, prefer larger wheels and expect some resistance on thick pile; for hard flooring, small rubber casters roll quietly and will not scratch the floor.
4. Solve the small-item fall-through problem before you buy. Wire mesh baskets drop beads, sequins, pins, and small caps. A cart with a drawer, like the Goovilla or the SYKIARIOL, solves it properly. If you want mesh baskets anyway, buy a few shallow trays or cut liners and treat it as a five-minute setup job.
5. Organize by weight and frequency, not by category alone. A simple zoning method works on any of these carts. Put your active project and the tools you reach for daily on the top tier, where the drawer or hook options are closest to your hand. Put mid-weight supplies in the middle, and reserve the bottom tier or the lowest drawers for bulk paper, clay, and yarn that you buy in quantity. Hang the things that roll away, which means scissors, pens, and tape, on the cups and hooks rather than the shelf.
6. Factor in where the cart will live. The widest carts here are 25 inches, and they need a genuine corner or a wall. The narrow SUNALLY 3 Tier at 10.6 inches and the LLMRR at the same width exist for closets and nooks. Height matters too: 25.5 inches goes under a desk, 31 to 34 inches sits at working height, and the DTK at 37.3 inches will not go under anything.
7. Plan for five minutes of care a month. Wipe plastic shelves with a damp cloth before paint dries, dry metal mesh to keep it from spotting, tighten the frame bolts on drawer carts after a few weeks of heavy loading, and check that the casters still lock. A cart that squeaks is usually a caster with fiber in it, and a wheel that no longer locks is a caster due for replacement. That maintenance is the difference between a cart that lasts years and one that ends up in a closet in a year.
Frequently Asked Questions
What is the best rolling cart for art supplies?
The best rolling cart for art supplies depends on what you make. For markers, beads, glue, and other small items, a multi-drawer cart such as the Giantex or GOFLAME 15 drawer model keeps everything contained in fifteen compartments. For paper, fabric, and larger materials, an open three-tier metal cart such as the Simple Houseware or Amazon Basics is stronger and cheaper. If you paint with water, look for drainage holes or a plastic body you can wipe clean.
What is the best storage option for craft supplies?
For most craft rooms, the best storage option is a rolling cart rather than a fixed shelf, because it moves to wherever the project is. An open three-tier metal cart suits paper and yarn, a drawer cart suits markers and small parts, and a cart with a wooden or raised top doubles as a work surface. If you already own more carts than you can park, upcycling an old dresser onto locking casters gives you deep drawers and a second life.
What is a good cart to carry stuff?
A good cart to carry stuff is a wheeled frame with two or three shelves, four swivel casters, and a handle you can reach from one side. Two of the casters should lock so the cart stays put while you load it. For heavy items look for a steel frame, and for small items add a drawer or lined baskets, because open wire shelves let beads and sequins fall through.
What are the best rolling carts available?
Our top three are the Simple Houseware 3-Tier Metal Utility Rolling Cart, rated at 4.7 stars from more than 32,000 ratings, as the best overall; the Amazon Basics 3-Tier Rolling Utility Cart for value; and the Pipishell 3 Tier Rolling Cart for deep baskets and tall supplies. All three are steel frame carts with locking casters that hold paper, yarn, and paint bottles without flexing.
What is a good rolling cart for books?
For books, weight capacity matters more than drawer count, because books are the densest load most people put on a cart. Look for a steel frame with a published total rating, and expect a cart rated 200 pounds or more to handle a full shelf of hardbacks. Deep baskets beat shallow mesh for books, since a tall stack on a lipped mesh shelf is easy to knock off, and check the shelf depth against your thickest volume.
What cart should I buy on Reddit?
The two names that come up most often in craft forums are the Lexington three-tier metal cart from Michaels and the Raskog utility cart from Ikea, and both get called sturdy for good reason: they are steel, they hold real weight, and casters are replaceable. Our caution is that the Raskog is narrow, so full-size 12×12 scrapbook paper fits awkwardly, and the Lexington mesh baskets need lining for small beads. Check the interior width before buying for paper.
Conclusion
The Simple Houseware 3-Tier Metal Utility Rolling Cart is the best rolling cart for craft supplies for most rooms, because a 220 pound steel frame, two locking casters, and a footprint that still fits full-size scrapbook paper solve the three problems that decide whether a craft cart works. Pick the Amazon Basics if you want the same format for less, the Pipishell if your supplies are tall, and a drawer cart if the majority of what you own is smaller than a fist.
Measure your interior space and your paper before you order, and check for a lock on at least two casters. Those two checks prevent most of the disappointments we found while loading these carts for this 2026 roundup.